Troubleshooting • Issue with gpiozero module following camera installation attempt

I was trying to install a raspberry pi camera, but kept running into an issue where after trying libcamera-jpeg -o image.jpg I would get the error *No Cameras Found*. I checked the hardware and from my understanding, I installed the camera the correct way but haven't been able to capture a picture. I also tried vcgencmd get_camera and it states supported = 1, detected = 1. Are there any other suggestions for troubleshooting this?

I decided to give up on the camera installation for a moment and had to continue another set of tasks on the pi. This includes flushing water through a port that is connected to the pi. On one of the Pis I wanted to install the camera on I got a random error in the gpiozero module. Where I have 2 reward pins (21, and 26) I began getting the error RuntimeError: Not running on a RPi! I was quite confused since I did not touch any of the pins and the system was working fine before. I ensured that the module was installed in the same directory as my other pis that work just fine, and that they are of the same version and they are, but I am still getting this error. I wasn't sure what else to try. I also have updated, upgraded, rebooted, and turned the pi on and off and nothing seems to be working.

Any suggestions would be greatly appreciated.

Statistics: Posted by greenmachine — Mon May 20, 2024 8:23 pm

---