Raspberry Pi OS • Re: Performance Optimization for CapCut on Raspberry Pi 4

Hello,

Running CapCut on a Raspberry Pi 4 (8GB) via Anbox is challenging due to performance issues like laggy playback and slow 4K exports. Here’s how to optimize:

Your Setup:
- Raspberry Pi 4 (8GB), Raspberry Pi OS 64-bit, Anbox, 128GB microSD (U3), cooling installed.

Issues:
- Laggy 1080p playback, 30+ min 4K exports, unresponsive system.

Answers:
1. Improve Anbox:
- Enable GPU acceleration (Mesa drivers: `sudo apt install mesa-vulkan-drivers`).
- Edit at 1080p/720p, not 4K.
- Limited by Anbox’s design.

2. Try Waydroid:
- Install Waydroid (uses Wayland, better GPU access).
- May improve playback/exports, but 4K still tough.

3. Overclocking & SSD:
- Overclock to 2.0GHz (`arm_freq=2000` in `/boot/config.txt`); cuts export time slightly.
- Use a USB 3.0 SSD for faster I/O, reducing lag.

Tips:
- Use lightweight OS (e.g., DietPi).
- Lower CapCut settings (preview quality, simple transitions).
- Pre-convert 4K to 1080p externally.

For more CapCut optimization tips, check [https://capcutmodapkall.com/]. The Pi 4 struggles compared to mid-range Android devices, so temper expectations.

Statistics: Posted by Bala Bob — Sun Mar 23, 2025 8:32 am

---