Troubleshooting • Re: Official Raspberry Pi M.2 HAT+ Raspberry Pi SSD

Code:

[    0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave  numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:91:7F:AC vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=5f8eb3bd-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=GB pcie-brcmstb.trace_itssm=1[    0.057029] /axi/pcie@1000120000/rp1/i2c@80000/panel_disp1@45: Fixed dependency cycle(s) with /axipcie@1000120000/rp1/dsi@128000[    0.057058] /axi/pcie@1000120000/rp1/dsi@128000: Fixed dependency cycle(s) with /axi/pcie@1000120000/rp1/i2c@80000/panel_disp1@45[    0.057197] /axi/pcie@1000120000/rp1/i2c@80000/panel_disp1@45: Fixed dependency cycle(s) with /axipcie@1000120000/rp1/dsi@128000[    0.057228] /axi/pcie@1000120000/rp1/dsi@128000: Fixed dependency cycle(s) with /axi/pcie@1000120000/rp1/i2c@80000/panel_disp1@45[    0.426942] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@1000110000 ranges:[    0.426947] brcm-pcie 1000110000.pcie:   No bus range found for /axi/pcie@1000110000, using [bus 00-ff][    0.426954] brcm-pcie 1000110000.pcie:      MEM 0x1b80000000..0x1bffffffff -> 0x0080000000[    0.426959] brcm-pcie 1000110000.pcie:      MEM 0x1800000000..0x1b7fffffff -> 0x0400000000[    0.426964] brcm-pcie 1000110000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000[    0.426967] brcm-pcie 1000110000.pcie:   IB MEM 0x1000131000..0x1000131fff -> 0xfffffff000[    0.428298] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0001:00[    0.769605] brcm-pcie 1000110000.pcie: link down[    0.774375] pcieport 0001:00:00.0: PME: Signaling with IRQ 38[    0.774426] pcieport 0001:00:00.0: AER: enabled with IRQ 38[    0.774620] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges:[    0.774623] brcm-pcie 1000120000.pcie:   No bus range found for /axi/pcie@1000120000, using [bus 00-ff][    0.774629] brcm-pcie 1000120000.pcie:      MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000[    0.774633] brcm-pcie 1000120000.pcie:      MEM 0x1c00000000..0x1effffffff -> 0x0400000000[    0.774638] brcm-pcie 1000120000.pcie:   IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000[    0.774643] brcm-pcie 1000120000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000[    0.774646] brcm-pcie 1000120000.pcie:   IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000[    0.775887] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00[    0.877609] brcm-pcie 1000120000.pcie: clkreq-mode set to default[    0.877612] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)[    0.885696] pcieport 0002:00:00.0: enabling device (0000 -> 0002)[    0.885714] pcieport 0002:00:00.0: PME: Signaling with IRQ 39[    0.885755] pcieport 0002:00:00.0: AER: enabled with IRQ 39[    0.890090] /axi/pcie@1000120000/rp1/i2c@80000/panel_disp1@45: Fixed dependency cycle(s) with /axipcie@1000120000/rp1/dsi@128000[    0.908076] /axi/pcie@1000120000/rp1/i2c@80000/panel_disp1@45: Fixed dependency cycle(s) with /axipcie@1000120000/rp1/dsi@128000[    0.908101] /axi/pcie@1000120000/rp1/dsi@128000: Fixed dependency cycle(s) with /axi/pcie@1000120000/rp1/i2c@80000/panel_disp1@45[    2.619414] input: 11-0014 Goodix Capacitive TouchScreen as /devices/platform/axi/1000120000.pcie/1f00080000.i2c/i2c-11/11-0014/input/input5sap144@raspberrypi:~ $ lspci0002:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)0002:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge