Official Display • Original 7" + Pi3 Mod. B

Hi, just had to reinstall my setup due to a defective SD card, downloaded the latest version via "Imager" and started up.
As expected, the screen comes upside down, so I chose to enter "lcd_rotate=2" in /boot/firmware/config.txt and restarted.
This did not work
Delete this line: dtoverlay=vc4-fkms-v3d and restarted...
The screen is black... nothing happens
Loaded a new SD card and tested and turned the screen via display setup... works but touch is not included
Tips??
Release date: March 15th 2024
System: 64-bit
Kernel version: 6.6
Debian version: 12 (bookworm)

Statistics: Posted by LasseEH — Sun Mar 31, 2024 2:18 pm

---