I suspect this is a question for the libreelec folks since that's the OS you're using. You'll more likely get a useful response on thier forums and/or support channel.
If you can get to a command prompt you might want to run the following commands and see if your drives are visible in their output:You might also want to check the systemd journal, /var/log/syslog, and the output from dmesg for any relevant error messages.
If you can get to a command prompt you might want to run the following commands and see if your drives are visible in their output:
Code:
lsusblsblkmountStatistics: Posted by thagrol — Fri Jun 14, 2024 11:44 pm