I2C is used to initialise the PMIC. and RP1. It might be worth reflashing the bootloader, trying booting without any peripherals connected and checking the HDMI diagnostic output.
If the error persists then unfortunately it is likely to be a hardware fault so you'd need to return to the reseller.
N.B. An orange blink can indicate that the transistor used to switch off the red LED has been damaged. It's located near the fan mount holes on the underside of the board.
If the error persists then unfortunately it is likely to be a hardware fault so you'd need to return to the reseller.
N.B. An orange blink can indicate that the transistor used to switch off the red LED has been damaged. It's located near the fan mount holes on the underside of the board.
Statistics: Posted by timg236 — Fri Jan 17, 2025 9:05 pm