Beginners • Re: Old rpi4 server /boot is almost full
2) IDK if there is some reason why you (now) need a lot of free space on the /boot partition. I know that sometime in the last few years, it was decided that the /boot had to be a lot larger than it...
View ArticleClik here to view.
Raspberry Pi OS • Re: Allo Boss2 Dac No Sound Output After Update to bookworm
I don't know if this helps with your problemI did a web search for Allo Boss2 DAC audio cardand found a reply which led to this https://github.com/raspberrypi/linux/is ... 1598459435Good luck...
View ArticleAutomation, sensing and robotics • Re: Digital potentiometer
i would just use a mosfet or relay to switch the main 12v supply on/offthen some kind of temp sensor that the pi can interface with, to measure its tempand then implement the entire thermostat logic...
View ArticleDevice Tree • Re: RPi5 dtoverlay i2c-fan fails with i2c-path parameter [SOLVED]
Whoops, my bad. Thank you.Statistics: Posted by hasmis — Fri Apr 04, 2025 11:41 am
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: rp5 i2c extra buses
Thank you so much. As soon as I scrape my brains back together this morning, I'll try it. The rp5 is so fast and delightful to work with. I still think I have a timing problem with the adxl355. I can...
View ArticleDevice Tree • Re: RPi 5 Watchdog
The watchdog device is now enabled by default on all Pis (*). Have you tried using it on a Pi 5?(*) Which means the dtparam documentation ("dtparam -h watchdog") is out of date.The watchdog doesn't...
View ArticleTroubleshooting • Re: HM-10 does not talk to raspi 5
Hi,thx, checked it out. 'AT+RENEW' is not acknowledged, maybe because it restarts the firmware. 'AT+RESET' comes with 'OK'.'AT+PASS' is 'AT+PIN' at my HM-10 ( many flavours out there ) and is...
View ArticleTroubleshooting • Re: rpi5 no longer booting after power outage
A power surge from when the electricity comes back on, could easily damage any electrical/electronic equipment. The mSD is much more fragile than a USB stickSometimes, after a power outage, it may not...
View ArticleDevice Tree • Re: RPi 5 Firmware Device Tree Modifications
Why don't you use the DTB the firmware prepares? That's the recommended way of using U-boot on a Raspberry Pi.Any chance the firmware could get a "fixup this device tree" call that could be used by...
View ArticleDevice Tree • Re: Add a led to gpio-leds driver using an overlay - PI3 B+
Your status=”true" is almost certainly causing the node to be disabled. The only acceptable "on" values are "okay" and absent - everything (?) else means "off".Statistics: Posted by PhilE — Fri Apr...
View ArticleRaspberry Pi OS • Re: Chromium updates
Firefox just updated to 137 so I guess they are working on that over ChromiumStatistics: Posted by Annie UK — Fri Apr 04, 2025 12:25 pm
View ArticleTroubleshooting • Re: Unable to access new NVME drive
Would like to hear an official RPT comment why these BiWin NVME's were using Samsung firmware. looks like I will have to spend some 35bucks on one of them to see myself.Because a small subset of the...
View ArticleOther programming languages • Re: Basic on Raspberry
Have you tested this code?Statistics: Posted by Vasian — Sat Apr 05, 2025 10:42 am
View ArticleTroubleshooting • Re: argon neo 5 NVMe not detected
Alright, I think I found exactly what I needStatistics: Posted by Minecraftplayer2937 — Sat Apr 05, 2025 11:18 am
View ArticleGeneral • PI pico W and breadboard problem
Hi,I noticed some strange behavior with the Wi-Fi connection when the Pi Pico W (RP2040) is on a breadboard. Sometimes it can only connect to Wi-Fi 1 out of 10 tries. My code includes unlimited...
View ArticleRaspberry Pi OS • Re: Pi5 screen blanker?
I'm trying to allow my Pi 5 to switch off the monitor after a few moments of inactivity too (like my Pi 4b did perfectly), and am also struggling.Code: touch .config/labwc/autostartreturns this:Code:...
View ArticleMicroPython • Re: MP3-Player with Pico and DFPlayer Mini
Anyway, write a little piece of code that just does the play/next function, then integrate what you learn into your main code.Ok, so I wrote a code to control the button-inputs (single-click,...
View ArticleClik here to view.
Raspberry Pi OS • Re: gpio-shutdown isn't working on Bookworm 64bit
On a Pi3 running Bookworm 64 bit, I attached a button to GPIO3 and Ground, and edited /boot/firmware/config.txt, then rebootedCode: [all]dtoverlay=gpio-shutdownNow one press of the button brings up...
View ArticleGeneral • Re: PI pico W and breadboard problem
I run my Pico W (three) and Pico 2W (two) on breadboard - no wifi issues.Maybe your breadboard is faulty?Statistics: Posted by neilgl — Sat Apr 05, 2025 11:57 am
View ArticleRaspberry Pi OS • Re: Multiple Workspaces
Try thisviewtopic.php?p=2307514&hilit=Multiple+ ... s#p2307514Hi. Thanks for responding. Yea I saw that one and followed the directions:"Add the following to ~/.config/labwc/rc.xml file:Code:...
View Article