Raspberry Pi Desktop for PC and Mac • Re: Need larger fonts
you don't have to do anything, i was just throwing thoughts out.you should just keep what you have, maybe when you do your next setup you'll have to deal with it.i'm pretty sure icewm has already...
View ArticleTroubleshooting • Re: Enable SSH access using rpi-imager --cli?
If you run across the developer, be sure to give him my regards! Statistics: Posted by bls — Fri Jan 26, 2024 11:59 pm
View ArticleTroubleshooting • SSH, nextcloud stopping working after plugging a external HDD
i'm having an issue where when i plug in an external HDD (1TB 2.5") SHH and nextcloud stops(apache too maybe) working.the HDD has it's on power source so it's not draining too much from the pi, and...
View ArticleBeginners • Re: Raspberry Pi Zero W as USB MIDI Host
That was it!I was using Pi but I should have been using my username. Rookie mistake!I am able to log in and get the command prompt with my username.Now I have to figure out if all the USB MIDI host...
View ArticleTroubleshooting • Re: usb not working
My Raspberry Pi is powered by the USB-C power supply it came with,I've got my micro-HDMI to HDMI plugged in and working but my Raspberry Pi keyboard and mouse only work on my computer, not on my...
View ArticleRaspberry Pi OS • Re: New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme...
I haven't received the latest update,I did not receive the last update from January I have a mvme ssd from wd which does not workfor a start make sure your syste is fully updated. (update +...
View ArticleTroubleshooting • Re: Raspberry Pi 5 - No Boot, Constant Red LED
Visual inspection of the board for any signs of damage?Check voltage on GPIO Header 3.3V pin.No signs of damage, the robot was stationary when the issue occurred and it was safely installed in an...
View ArticleUbuntu • Re: Booting an older Ubuntu version on Raspberry Pi 5
The decision to not support the current Ubuntu LTS 22.04 version was a surprising and poor one... By so far installing the kernel from 23.10 (6.5) to 22.04 aarch64 and making a small change to the...
View ArticleTroubleshooting • Re: Second monitor not displaying after boot
power off, remove the SD card, power upyou should get the diagnostic display. pay attention to the "EDID" data lines... if both monitors do not say "EDID=ok" then it's possible the second monitor is...
View ArticleGeneral discussion • Re: Question about nvme and official case
Get better speakers. I can't imagine how you'd want louder than these Creative T40's I have however the original model I have is better I use a USB sound adapter for my Pi5 connected to...
View ArticleTroubleshooting • Ancient 2B failed to reboot. Repair or salvage files?
I have an old 2B that I've been using to capture time-lapse photos from a dSLR via gphoto2 during honey bee swarm season.I removed the camera last summer, (but apparently left the Pi running, doing...
View ArticleCompute Module • Help Powering the CM4 IO Board from J20
Hello all,I'm building a CM4 powered low power NAS using the Raspberri PI Compute Module 4 IO Board.I'm currently powering the board with a Pico PSU with +12v from the PSU going to the J19 Barrel...
View ArticleTroubleshooting • Re: Ancient 2B failed to reboot. Repair or salvage files?
normally what i would do is use a secondary install to inspect.do you have a extra sd to do a new install onand a sd card readerStatistics: Posted by kerry_s — Sun Jan 28, 2024 12:37 am
View ArticleTroubleshooting • Re: Samba share with symbolic links fails on windows PC
Almost certainly a server configuration issue. Neither Windows nor the smb protocol understand symbolic links.You need to do at least two things:Check the permissions on the directory the link points...
View ArticleGeneral discussion • Re: Raspberry Pi 5 - SSD SATA or SSD NVMe ?
NVME is somewhat faster... enough to be noticeable in desktop use case switching from a Kingston A400 (USB-SATA) to a Pimoroni Base with a Kioxia Exceria.You can double the speed of NVMe by adding...
View ArticleAutomation, sensing and robotics • Re: SEN0343 Differential Preassure Sensor...
So, when you say your attempts end in failure, what do you mean? Does the code not compile? Or does the sensor not respond?The first thing I'd check is wiring. Are you powering the device from 3.3V?...
View ArticleCamera board • Re: imx462 flickering/banding
I agree. It is difficult to switch LCG and HCG mode dynamically and seamlessly.Can we define LCG and HCG mode and start with the option like --hcg ?HCG mode is already x5.8 gain, the band noise can be...
View ArticleBeginners • Re: "Win32 Disk Imager" read Raspberry Pi image too big
Thanks for your reply.Checked with Raspberry pi forum, I find several tools.piKlone : https://www.youtube.com/watch?v=F5l3fEHm_Q8 rpi-clone: https://github.com/billw2/rpi-clonepiclone:...
View ArticleAdvanced users • Re: Shrink-backup: a backup tool for SBC:s
Version 0.9.5 released.Added support for GPT partition table.Experimental support for btrfs.Original post edited with information.https://github.com/UnconnectedBedna/shrink-backupStatistics: Posted by...
View ArticleGeneral discussion • Re: No RPi 5 for me.
I can only get the kit, $189 with old PS and uSD.That the price of a new low end PC motherboard?Statistics: Posted by Gavinmc42 — Mon Jan 29, 2024 12:39 am
View Article